100% cotton or cotton/polyester blends. Always test print fabric before beginning production
The XOLB series inks can be printed right out of the containers without any modifications.
80 to 305
Any direct emulsion or capillary film.
Gel/ Flash Cure:
Flash 2-3 seconds with the ink reaching 150-250F. To gel, ink should not exceed 250F. Always complete a test print before doing a production run.
325 F (163C)
Transfer at 350F with a transfer adhesive. Cold peel.
Mineral spirits or any environmentally friendly plastisol screen wash.
Recommended storage temperature is 65-90 F (18-32 C). Avoid storing in direct sunlight and moist humid air.
P-5011 Curable Reducer: Use if thinning is required